Trendnet TEW-P1U 사용자 설명서

Installation Procedure

1. At your file server console, type “load install”.

2. Select

“NCF files options”.

3. Select

“Edit AUTOEXEC.NCF file”.

4. Add or Modify the “SET BINDERY CONTEXT =” line to include the NDS organization (O)

and all organization unit (OU) objects where users are located. For example: SET
BINDERY CONTEXT = O=ABC; OU=SALES.OU=ABC-USA.O=ABC;
OU=TECH.OU=ABC-USA.O=ABC ;

5. When done, save the new AUTOEXEC.NCF file. Please restart your NetWare file server

in order for new settings to take effect immediately.

6. Next, please refer to “Auto Setup” section in this chapter to finish installing your print

server.

7. Log into your NetWare file server as a Supervisor (Admin.) or equivalent via a Bindery

connection.

8. Run NetWare’s PCONSOLE and add users to the “Queue Users” list.
9. From your NetWare client computer, such as Windows 95/98/Me, create a printer that is

connected (redirected) to the NetWare print queue serviced by the print server.

Note: Please refer to NetWare’s Print Server/Services manuals for detailed PCONSOLE

commands.

SNMP Setup

TCP/IP networks use a standard management protocol called Simple Network

Management Protocol (SNMP). SNMP is widely used in the industry as a solution for remote
network management and monitoring of networking devices. SNMP actually includes a
protocol, a database structure specification, and a set of database objects. The database
objects are contained in a standard database called Management Information Base (MIB)
that is stored on the networking device called SNMP agent. The print server's SNMP
implementation runs in a TCP/IP environment.

A host on the network running Network Management System (NMS) software can

access the print server device by reading and writing the MIB objects stored in the device.
The Network Management Systems are available from many third-party vendors, such as
Hewlett-Packard's OpenView.