Trendnet TEW-P1U 사용자 설명서

 

When accessing (traversing) MIB objects in the print server using NMS software called 

SNMP manager, you need to provide a community name in each SNMP request for 
authentication purpose. The print server supports up to two community names. The default 
community name is public (case-sensitive), with Read Only access right in default. 

When an unusual condition or activity occurs, the SNMP agent alerts the SNMP 

manager through SNMP traps. Following list summaries SNMP trap messages that the print 
server will send out. 
 
Activities/SNMP Trap Messages   

Description 

Link Up or Link Down 

When the network interface on the print server fails, a link down 
trap message is generated; if the network interface comes back 
to life, a link up trap message is sent. 

 
Cold Start or Warm Start When the print server restarts, the cold start or warm start trap 

message is generated. 

 
Authentication Failure  When the print server received a SNMP request with a 

community name that does not match the community name the 
print server is configured with  (stored in the print server's 
memory), an authentication failure trap message is generated. 

 

 
In the print server's SNMP implementation, the following MIB objects are available for 

updating. 

 

MIB Object Names   

 

Description 

system.sysContact 

 Indicates the network administrator's name. 

 
system.sysName 

Indicates the print server's name for identification. 

 
system.sysLocation 

Indicates the location of the print server. 

 
 
snmp.snmpEnableAuthenTraps 

Enables or disables the function of sending SNMP Authentication 

Failure trap message to the network administrator, if the 
community name within a SNMP request is not correct. 

 
 
Users can set up print server’s SNMP functions by using their browsers. 
 
1.Click Setup, it then appears the sub-menu. 

2.Click SNMP, it then as shown in the following picture. 

 

46