Epson 7000 사용자 설명서

„

If the error recurs even after reloading the paper, make sure the 
paper-end sensor on top of the carriage is installed correctly and 
working properly.

†

Problem
The printer is not able to continue paper feeding/initializing, printing, 
or ink sequencing because the Release lever was moved to the 
Release position. Or, the printer cannot begin printing because the 
lever is in the release position.

†

Solution

„

Pull the lever forward to the set position. However, if printing was 
interrupted because the lever was pushed back to the release position 
and the paper shifted, the print job may be marred.

„

If the lever is forward down and this error still occurs, check the 
Release-Lever position sensor.

†

Problem
One or more ink cartridges have run out of ink, a near-end cartridge 
has been reinstalled, or an unsupported ink cartridge has been 
installed.

†

Solution

„

Replace the empty ink cartridge.

„

Make sure the ink cartridge is the proper type of cartridge for the 
printer and the proper color for that slot.

„

If the proper cartridge is installed and this error still occurs, check the 
Ink-End sensor.

†

Problem
An ink cartridge is not installed or is not installed properly.

†

Solution

„

Install the proper ink cartridge in the empty slot.

„

If the proper cartridge is installed and this error still occurs, check the 
Ink-Cartridge sensor.