Epson 7000 사용자 설명서
EPSON Stylus Pro 7000
Revision B
Disassembly & Assembly
Disassembly Flow
140
4.2.3.10 Removing the Ink Cartridge Sensor
1.
Remove the Ink Cartridge Slot as described in “Removing the Ink
Cartridge Holder & Slots” on page 137.
Cartridge Holder & Slots” on page 137.
2.
Remove the Ink Cartridge Sensor cable from the hooks as shown below,
and then remove the cable completely through the bottom.
and then remove the cable completely through the bottom.
Figure 4-56. Ink Cartridge Sensor Cable Removal
3.
Remove the screw (CBS M3x10) securing the Ink Low sensor and remove
the sensor.
the sensor.
Figure 4-57. Ink Low Sensor Removal
4.
Remove two screws (CUPS M3x6) securing the needle frame and remove
the frame.
the frame.
5.
Remove one screw (CBS M2x8) securing the I/C sensor to the needle
frame and remove the I/C sensor.
frame and remove the I/C sensor.
Figure 4-58. I/C Sensor Removal
Slot frame
Hooks
Ink Low
sensor
One screw
(M3x10)
Two
screws
(M3x6)
(M3x6)
I/C slot
needle
One screw
I/C sensor