Epson 7000 사용자 설명서

1.

Remove the R Side Cover as described in “R Side Cover Removal” on 
page 114.

2.

Remove the Rear Cover as described in “Rear Cover Removal” on 
page 118.

3.

Disconnect the harness for the HEAD_SLIDE Sensor Assembly from its 
connector on the main board and take the harness out from the hole in 
the R Side Frame.

4.

Push the carriage lock using your finger to unlock the carriage and move 
the carriage from the home position to the left.

5.

Remove the one (CP(W) M3x6) screw securing the HEAD_SLIDE Sensor 
Assembly and remove the HEAD_SLIDE Sensor Assembly.

6.

Release the harness for the HEAD_SLIDE Sensor Assembly from the four 
cable clamps on the Maintenance Assembly and CR Rail Assembly.