Epson 7000 사용자 설명서

1.

Make sure “Ready” appears on the LCD. Press the SelecType button 
multiple times until “Printer Status Menu” appears. Then press the Item 
button.
“Version B xxxxx” appears. Write down the version number.

2.

Turn off the printer.

3.

Remove the access cover from the rear of the printer, and insert the 
prepared firmware card (xxxxxxxx.ROM) into slot CN20. The top surface 
of the card faces the outside of the printer.
The card is EPSON service tool #F727 Flash memory card.

4.

Turn on the printer.

5.

"Update Complete" appears when the firmware update has finished.

6.

Turn off the printer, remove the memory card, and then turn on the 
printer.

7.

Verify the firmware version according to the directions in step 1, turn off 
the printer, and see the Caution at the top of the previous page.