Epson 7000 사용자 설명서

This section gives detailed descriptions of all adjustments necessary to 
properly service and maintain this printer.

1.

Make sure the Paper Set Lever is in the Set (forward) position.

2.

Press the following buttons on the Control Panel while turning on the 
printer.

[Paper Feed +] + [Paper Feed -] + [Enter]

3.

When "Check: Test" appears on the LCD, the printer has entered the Self-
Diagnostic mode.

To exit the Self-Diagnostic mode, turn off the printer.

Use the Control Panel buttons to activate a Self-Diagnostic function, as 
described in the table below.

Pause

Return up one 

level

Moves up one level (without selecting at 
item).

SelecType

Next menu

Displays the next menu.

Paper Source

Previous menu

Displays the previous menu.

Paper Feed +

Next item or value

Displays the next item or increases the value 
of the item shown on the LCD.

Paper Feed -

Previous item or 

value

Displays the previous item or decreases the 
value of the item shown on the LCD.

Cut/Eject

Enter

Selects/activates the item.

Cleaning

Feed paper & cut