Epson 7000 사용자 설명서

After the initial ink charge, this function verifies that the nozzles are properly 
firing ink If the some nozzles are not firing correctly or at all, you can run the 
cleaning operation from this menu.

1.

Make sure "Adj: Check Nozzle" appears on the LCD and press the Enter 
button.

2.

Load paper if not already loaded and replace any low or empty ink 
cartridges if detected. If these conditions are OK, the printer prints the 
following check pattern

.

The pattern includes the following colors from left to right; black, cyan, 
magenta, yellow, light magenta, and light cyan.

3.

When the check pattern is finished printing, "Nozzle Check End" appears 
on the LCD. If the pattern printed all six colors properly with no lines or 
dots missing, press the Enter button to end this adjustment procedure. If 
lines or dots are missing, press the SelecType button to start the cleaning 
cycle.