Epson 7000 사용자 설명서

Note: The underlined item equals the default.

There are several consumable parts in the printer, and the printer employs 
separate counters to keep track of each one. The “Maintenance Req. 0100” 
message appears on the display to warn the user when the Waste Ink pads 
are about 99% full.

The printer can continue to print even though the “Maintenance Req. 0100* 
message appears instead of the “Ready” or “Printing” message. However, 
when the waste ink counter determines the Waste Ink pads are 100% full, the 
“Service Req 00000100” message appears and the printer can no longer print.

To clear this condition, perform the following.

Replace:

The following items must be replaced.

- Waste Ink Pads
- Pump Assembly
- Cap Assembly
- FBox
- Cleaner, Head

Required Adjustments:

Perform the following adjustments after replacing 
the maintenance parts.

- Waste Ink Counter Clear
(See “Maintenance Mode 2” on page 50)

- Cleaner Counter
(See “Maintenance Mode 2” on page 50)

PAPER THICK

STD

0.0~1.6mm

Select the thickness, to 0.1mm, of the 
paper you are using to check the platen 
gap. Normally, leave set to Standard.

ADJUST. PATT.

All

#1~12

Selects which patterns to print. (All 
patterns or selected patterns only.)

#1

1~4~7

Bi-D adjust 1 (200cps, Normal Dot, left)

#2

1~4~7

Bi-D adjust 2 (200cps, Normal Dot, right)

#3

1~4~7

Bi-D adjust 3 (200cps, Micro Dot, left)

#4

1~4~7

Bi-D adjust 4 (200cps, Micro Dot, right)

#5

1~4~7

Bi-D adjust 5 (300cps, Normal Dot, left)

#6

1~4~7

Bi-D adjust 6 (300cps, Normal Dot, right)

#7

1~4~7

Bi-D adjust 7 (300cps, Micro Dot, left)

#8

1~4~7

Bi-D adjust 8 (300cps, Micro Dot, right)

#9

1~4~7

L/R adjust 1 (200cps, Normal Dot)

#10

1~4~7

L/R adjust 2 (200cps, Micro Dot)

#11

1~4~7

L/R adjust 3 (300cps, Normal Dot)

#12

1~4~7

L/R adjust 4 (300cps, Micro Dot)