Ricoh AP1400/AP2000 사용자 설명서
Paper and Other Media
92
9
er. Then slide it inside until it
stops.
stops.
Type 2 Printer: Loading
Envelopes
Envelopes
As there are so many kinds of enve-
lopes, be sure to check if those to be
used are supported by this printer.
lopes, be sure to check if those to be
used are supported by this printer.
Important
❒ Even when the optional envelope
feeder is not installed, you can
specify the sizes for the envelopes
for Tray 2 using the operation pan-
el. However, make sure that the
envelopes cannot be loaded into
the tray without the envelope feed-
er.
specify the sizes for the envelopes
for Tray 2 using the operation pan-
el. However, make sure that the
envelopes cannot be loaded into
the tray without the envelope feed-
er.
❒ To install the envelope feeder, in-
stallation of the optional paper
unit is required.
unit is required.
Reference
For more information on enve-
lopes, see P.74 “Paper types and cau-
tions”.
lopes, see P.74 “Paper types and cau-
tions”.
Type 2 printer: loading envelopes onto
the bypass tray
the bypass tray
Note
❒ Please refer to the inside of the
front cover of this manual to con-
firm which printer (Type 1 Printer
or Type 2 Printer) you have.
firm which printer (Type 1 Printer
or Type 2 Printer) you have.
Important
❒ With the bypass tray, you can load
A
Open the bypass tray.
B
Slide the left side guide to the left
and extend the bypass tray ex-
tender.
and extend the bypass tray ex-
tender.
C
Load envelopes until it stops,
with the print side down and the
with the print side down and the
TS4Y190E
TS4Y110E
TS4Y131E