Intermec PF4i 사용자 설명서

The EasyCoder PF4i Compact Industrial uses a media supply roll post 
that can be fi tted in three different positions inside the media compart-
ment. The position depends on the type of side door and whether the 
printer is fi tted with an integral liner takeup or not. Alternatively, an 
external media supply (for example a box of fan-folded tickets) behind 
the printer can be used. A rotating media supply hub is also available as 
an option, see Chapter 9, “Options.”

The media supply roll post fi ts both 38-40 mm (1.5 inches) and 76 mm 
(3.0 inches) cores since it can be moved vertically in the slot in the center 
section. The bottom position is intended for small cores and the top 
position is for large cores. The post is locked by a straight-slot screw and 
has a moveable edge guide to fi t various media widths.

To move the post to a different slot; remove the screw, twist the post a 
quarter of a turn, and pull it out. 

To fi t the post; rotate it a quarter of a turn, insert it into the appropri-
ate slot in the center section (see next page), and twist back so the lips 
engage the cutouts in the sides of the slot. Move it up (large core) or 
down (small core) as far as it goes and secure it with the screw.

Edge guide

Screw