Intermec PF4i 사용자 설명서

There are four sets of slots and threaded holes in the printer’s center sec-
tion for the media supply roll post or rotating hub (optional). These slots 
allow the largest possible roll size to fi t, given the limitations of any liner 
takeup unit and/or the full enclosure provided by the long side door or 
Megatop. The positions are indicated by numbers engraved in the center 
section.

•  Position 1 is used when the media compartment is fully enclosed by a 

long side door, regardless of the existence of any integral liner takeup 
unit. Maximum roll size is 152 mm (6 inches).

•  Position 2 is not used. 

•  Position 3 is used when the printer has an integral liner takeup unit 

and a long side door. This position is also used with the 8-inch 
Megatop. Maximum roll size is 213 mm (8.38 inches).

•  Position 4 is not used.

The printer can also use an external media supply located behind the 
printer, except when it has an 8-inch Megatop.

Position 1

Position 3

Position 2
(not used)

Position 4
(not used)