IBM S544-5361-01 사용자 설명서

IBM Network Color Printer Operator’s Guide

 

 

1.

Make sure that the paper loaded in the printer meets the specifications listed 
in “Choosing Paper” on page 2–2.

2.

Inspect the entire paper path for dirt and toner. Clean the paper path as 
required (see “Cleaning the Paper Path” on page 8–3).

3.

Replace the photoconductor drum cartridge (see “Replacing the 
Photoconductor Drum Cartridge” on page 5–33).

1.

Run several full-color gradient test prints from the density control panel (see 
“Printing Test Prints from the Density Control Panel” on page 6–24).

• If the vertical line appears on 1 color only, replace the toner cartridge for that 

color (see “Replacing Toner Cartridges” on page 5–4).

• Otherwise, go to step 2.

2.

Replace the photoconductor drum cartridge (see “Replacing the 
Photoconductor Drum Cartridge” on page 5–33).

3.

Check the fuser rollers for flaws or dirt buildup.

• If you see flaws on the fuser rollers, replace the fuser unit (see “Replacing 

• If you see dirt on the fuser rollers, try to remove it using the procedure 

described in “Cleaning the Fuser Rollers” on page 8–5.

• If you cannot remove all of the dirt, replace the fuser unit.

4.

Inspect the entire paper path for dirt and toner. Clean the paper path as 
required (see “Cleaning the Paper Path” on page 8–3).

5.

Clean the separation corona wire (see “Cleaning the Separation Corona Wire” 
on page 8–3.

6.

Replace the separation corona unit (see “Replacing the Separation Corona 
Unit” on page 8–10).