Genicom PC4 사용자 설명서

Computer Connection

All EasyCoder PC4 models are fitted with a 36pin female Centronics 

connector for the parallel interface port, a DB-9pin female connector for 

the RS-232 serial interface port, and a USB connector. Though all ports 

can be connected simultaneously, only one should be used at a time.

Centronics Parallel Interface

If you intend to use the Intermec InterDriver or any version of Intermec 

LabelShop, connect the parallel communication cable delivered between 

the printer’s Centronics interface connector and the parallel port of your 

PC (LPT1). 
The parallel interface can also be used for programming the printer using 

the ESim protocol described in the Intermec ESim v6.XX, Programmer’s 

Reference Manual. However, prompts and other information from printer 

to host cannot be transmitted, since the parallel interface is one-way 

(host-to-printer) only. 

O I

RS-232

Centronics

USB