Brother HL-L8350CDW 사용자 설명서

General Information 

1

### means a number within the range of 000 to 255. On connection to the network, if the machine's ‘Boot Method’ is ‘Auto’ the machine will attempt 
to set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found, an APIPA IP address will 
be allocated, such as 169. 254. [001-254]. [000-255]. If the ‘Boot Method’ of the machine is set to ‘Static’ you must manually enter an IP address 
from the machine's control panel.

TCP/IP

Boot Method

-

Auto* / Static / RARP / 
BOOTP / DHCP 

Chooses the IP method 
that best suits your needs.

IP Address

-

###.###.###.###
(000.000.000.000)*

Enter the IP address.

Subnet Mask

-

###.###.###.###
(000.000.000.000)*

Enter the Subnet mask.

Gateway

-

###.###.###.###
(000.000.000.000)*

Enter the Gateway 
address.

IP Boot Tries

-

0 / 1 / 2 / 3* / ... / 32767 

Specifies the number of 
attempts the machine will 
try to obtain an IP address 
when the Boot Method is 

set to any setting except 
Static.

APIPA

-

On* / Off Automatically 

allocates 

the IP address from the 
link-local address range.

IPv6

-

On / Off* 

Enables or disables the 
IPv6 protocol.

Ethernet

-

-

Auto* / 100B-FD / 
100B-HD / 10B-FD / 
10B-HD 

Chooses Ethernet link 
mode.

Wired Status

-

-

Active 100B-FD / 
Active 100B-HD / 
Active 10B-FD / 
Active 10B-HD / 
Inactive / Wired OFF 

Displays Ethernet link 
status.

MAC Address

-

-

-

Displays MAC address of 
the machine.

Security

IPsec

-

On / Off*

IPsec is an optional security 
feature of the IP protocol 
that provides authentication 
and encryption services. 
We recommend contacting 
your network administrator 
before changing this 
setting.

Network Reset

Restores all network settings of the internal print server to the factory settings.

 The factory settings are shown in Bold with an asterisk.