Brother HL-L8350CDW 사용자 설명서
General Information
98
3
WLAN
TCP/IP
Boot Method
Auto* / Static / RARP /
BOOTP / DHCP
BOOTP / DHCP
Chooses the IP method
that best suits your
needs.
that best suits your
needs.
IP Address
###.###.###.###
(000.000.000.000)*
(000.000.000.000)*
Enter the IP address.
Subnet Mask
###.###.###.###
(000.000.000.000)*
(000.000.000.000)*
Enter the Subnet mask.
Gateway
###.###.###.###
(000.000.000.000)*
(000.000.000.000)*
Enter the Gateway
address.
address.
IP Boot Tries 0 / 1 / 2 / 3* / ... / 32767
Specifies the number of
attempts the machine
will try to obtain an IP
address when the Boot
Method is set to any
attempts the machine
will try to obtain an IP
address when the Boot
Method is set to any
setting except Static.
APIPA
On* / Off
Automatically allocates
the IP address from the
link-local address
range.
the IP address from the
link-local address
range.
IPv6
On / Off*
Enables or Disables the
IPv6 protocol.
IPv6 protocol.
WLAN Assistant
-
-
You can configure your
wireless network settings
using the Brother
CD-ROM.
wireless network settings
using the Brother
CD-ROM.
Setup Wizard
-
-
Configures the wireless
network settings using
the setup wizard.
network settings using
the setup wizard.
WPS/AOSS
-
-
Configures the wireless
network settings using
WPS or AOSS™
method.
network settings using
WPS or AOSS™
method.
WPS w/PIN Code
-
-
Configures the wireless
network settings using
WPS with a PIN code.
network settings using
WPS with a PIN code.
Network for HL-L8350CDW and HL-L8350CDWT (continued)
Submenu 1
Submenu 2
Menu Selections Options
Descriptions
The factory settings are shown in Bold with an asterisk.