Toshiba TECRA S1 사용자 설명서
4.4 HDD
4 Replacement Procedures
TECRA S1 Maintenance Manual
4-25
3. Remove the HDD pack by pulling the HDD cover attached to the HDD pack.
NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble or
replace the HDD pack only if it failed.
replace the HDD pack only if it failed.
4. Place the HDD pack on a flat surface (such as a desk), and remove the four M3x4
black flat-head screws.
5. Remove the HDD chassis.
6. Remove the HDD connector.
Figure 4-13 Removing the HDD chassis
CAUTION: Do not apply pressure to the top or bottom of the drive.