Toshiba TECRA S1 Manual Do Utilizador

4.4 HDD

4 Replacement Procedures

TECRA S1 Maintenance Manual

4-25

3. Remove the HDD pack by pulling the HDD cover attached to the HDD pack.

NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble or
replace the HDD pack only if it failed.

4. Place the HDD pack on a flat surface (such as a desk), and remove the four M3x4

black flat-head screws.

5. Remove the HDD chassis.

6. Remove the HDD connector.

Figure 4-13 Removing the HDD chassis

CAUTION: Do not apply pressure to the top or bottom of the drive.