Avaya V880 설치 설명서

To determine what device paths are available on your system:

1. Insert a tape into the tape drive.

2. Enter the following commands:

If the device path is correct, a message that is similar to the following is displayed:

If the device path is incorrect, a message that is similar to the following is displayed:

If there is no tape in the tape drive, a message that is similar to the following is 
displayed:

If the tape drive is busy, a message that is similar to the following is displayed:

HP DAT-72 tape drive:

   sense key(0x0)= Unit Attention

residual= 0   retries= 0

   file no= 0   block no= 0

/dev/rmt/0c: No such file or directory 

/dev/rmt/0c: No tape loaded or drive offline

/dev/rmt/0c: Device busy