Avaya V880 설치 설명서

As tape drives are added to and removed from a system, the device instance numbers can 
get out of sequence with the number of tape drives. For example, if a system has two tape 
drives, and one is removed, the system may accidentally try to use a tape drive that no 
longer exists.

To reassign device instance numbers for tape devices:

1. Log in to the system as root.

2. Make sure that the target addresses for any SCSI tape drives are set correctly.

Typically, the internal tape drive is SCSI address 5, and an external tape drive is SCSI 
address 4. If you change the SCSI address, you must turn the tape drive power off and 
back on.

3. Insert the Solaris CD-ROM into the DVD-ROM drive.

4. After about 15 seconds, enter the following commands:

This reassigns the device instance numbers for the tape devices.

5. Enter:

6. Remove the Solaris CD-ROM.