Optoma Technology TX665UTI3D 사용자 가이드

15

English

or



Turn on the 

projector first and 

then select the 

signal sources.

1.  Securely connect the power cord and signal cable. When 

connected, the POWER/STANDBY LED will turn Amber. 

2.  Turn on the lamp by pressing “ ” button either on the top of 

the projector or on the remote. The POWER/STANDBY LED 

will now turn Green.

  The startup screen will display in approximately 10 seconds. 

The first time you use the projector, you will be asked to 

select the preferred language and power saving mode. 

3.  Turn on and connect the source that you want to display 

on the screen (computer, notebook, video player, etc). The 

projector will detect the source automatically. If not, push 

menu button and go to “OPTIONS”.  

Make sure that the “Source Lock” has been set to “Off”.



If you connect multiple sources at the same time, press the 

“SOURCE” button on the control panel or direct source keys 

on the remote control to switch between inputs.



When Power mode 

(Standby) is set to 

Eco (<0.5W), the 

VGA output, Audio 

pass-through 

and RJ45 will be 

deactivated when 

the projector is in 

standby.