Optoma Technology TX665UTI3D 사용자 가이드

16

English



Contact the 

nearest service 

center if the 

projector displays 

these symptoms. 

See pages 

87-88 for more 

information.

When the warning indicators (see below) come on, 

the projector will automatically shutdown:

 



  “LAMP” LED indicator is lit red and if “POWER/STANDBY” 

indicator flashes amber.



  “TEMP” LED indicator is lit red and if “POWER/STANDBY” 

indicator flashes amber. This indicates the projector has 

overheated. Under normal conditions, the projector can be 

switched back on.



  “TEMP” LED indicator flashes red and if “POWER/STAND-

BY” indicator flashes amber. 

 

 

Unplug the power cord from the projector, wait for 30 seconds 

and try again. If the warning indicator light up again, please 

contact your nearest service center for assistance. 

1.  Press the “ ” button on the remote control or 

on the control panel to turn off the projector. 

The following message will be displayed on the screen. 

   Press the “ ” button again to confirm otherwise the 

message will disappear after 15 seconds. When you 

press the “ ” button for the second time, the projector will 

display countdown timer and will shut down.

2.  The cooling fans continue to operate for about 10 seconds 

for cooling cycle and the POWER/STANDBY LED will 

Flash Green. When the POWER/STANDBY LED lights 

solid Amber, the projector has entered standby mode.

  If you wish to turn the projector back on, you must wait 

until the projector has completed the cooling cycle and 

has entered standby mode. Once in standby mode, simply 

press “ ” button to restart the projector.

3.  Disconnect the power cord from the electrical outlet and 

the projector.

4.  Do not turn on the projector immediately following a power 

off procedure.