Hoshizaki FD-1001MAH(-C) 사용자 설명서

16

1. Electrical connection must be hard-wired and must meet national, state, and 

local electrical code requirements. Failure to meet these code requirements 
could result in death, electric shock, serious injury, fire, or severe damage to 
equipment.

. This unit requires an independent power supply. See the nameplate for 

proper voltage and breaker/fuse size. Failure to use a proper breaker or fuse 
can result in a tripped breaker, blown fuse, or damage to existing wiring. This 
could lead to heat generation or fire.

3. 

THIS UNIT MUST BE GROUNDED. Failure to properly ground this unit 

could result in death or serious injury.

4. Electrical connection must be made in accordance with the instructions on 

the "WARNING" tag, provided with the pig tail leads in the junction box. See 
Fig. 3.

5. 

THE REMOTE CONDENSER UNIT MUST BE GROUNDED. The power 

supply and ground wire to the remote condenser unit are supplied from the 
icemaker. See "II.F.5. Electrical Connection."

6. To reduce the risk of electric shock, make all remote condenser unit 

connections before connecting the icemaker power supply.

7. On remote air-cooled model, the icemaker should have power for a minimum 

of 4 hours prior to startup to prevent compressor damage.

• Usually an electrical permit and services of a licensed electrician are required.
• The maximum allowable voltage variation is ±10 percent of the nameplate rating.
• The white lead must be connected to the 

neutral conductor of the power source. 
CAUTION! Miswiring may result in severe 
damage to the icemaker. See Fig. 3.

• The opening for the power supply connection 

is 7/8" DIA to fit a 1/" trade size conduit.

&-&$53*$"-$0//&$5*0/

5IFXIJUFMFBENVTUCFDPOOFDUFE
UPUIFOFVUSBMDPOEVDUPSPG
UIFQPXFSTPVSDF
.JTXJSJOHSFTVMUTJOTFWFSF
EBNBHFUPUIFJDFNBLFS
4FF'JHCFMPX

&-&$53*$"-$0//&$5*0/

5IFXIJUFMFBENVTUCFDPOOFDUFE
UPUIFOFVUSBMDPOEVDUPSPG
UIFQPXFSTPVSDF
.JTXJSJOHSFTVMUTJOTFWFSF
EBNBHFUPUIFJDFNBLFS
4FF'JHCFMPX

XJSFXJUIOFVUSBM

GPS7