Juniper Networks EX4200 사용자 설명서
■
SFP+ transceiver
■
XFP transceiver
NOTE: Uplink modules are not part of the standard package and must be ordered
separately.
separately.
The power supply, fan tray, uplink module, and transceivers are hot-removable and
hot-insertable: You can remove and replace them without powering off the switch
or disrupting switch functions.
hot-insertable: You can remove and replace them without powering off the switch
or disrupting switch functions.
NOTE: If you have a Juniper J-Care service contract, register any addition, change,
or upgrade of hardware components at
or upgrade of hardware components at
. Failure to do so
can result in significant delays if you need replacement parts. This note applies if
you change the type of power supply or add a new type of uplink module. It does
not apply if you replace these components with the same type of component.
you change the type of power supply or add a new type of uplink module. It does
not apply if you replace these components with the same type of component.
Related Topics
■
■
■
■
■
■
■
■
■
Chassis Status LEDs in EX3200 Switches
The front panel of an EX3200 switch has three LEDs on the far right side of the panel,
next to the LCD panel (see Figure 9 on page 17).
next to the LCD panel (see Figure 9 on page 17).
Figure 9: Chassis Status LEDs in an EX3200 Switch
Chassis Status LEDs in EX3200 Switches
■
17
Chapter 2: Component Descriptions