Cisco Systems 3560 사용자 설명서
4-6
Catalyst 3560 Switch Software Configuration Guide
OL-8553-06
Chapter 4 Configuring Cisco EnergyWise
Managing Single Entities
Manually Managing Power
•
•
•
•
Powering the Entity
Beginning in privileged EXEC mode:
Command
Purpose
Step 1
show energywise
(Optional) Verify that EnergyWise is disabled.
Step 2
configure terminal
Enter global configuration mode.
Step 3
energywise domain domain-name secret [0 | 7]
password [protocol udp port udp-port-number
[interface interface-id | ip ip-address]]
password [protocol udp port udp-port-number
[interface interface-id | ip ip-address]]
Enable EnergyWise on the entity, assign the entity to a domain
with the specified domain-name, and set the password for secure
communication among the entities in the domain.
with the specified domain-name, and set the password for secure
communication among the entities in the domain.
•
(Optional) 0—Use an unencrypted password. This is the
default.
default.
•
(Optional) 7—Use a hidden password.
If you do not enter 0 or 7, the entity uses the default value of
0.
0.
•
(Optional) port udp-port-number—Specify the UDP port
that sends and receives queries.
that sends and receives queries.
The range is from 1 to 65000. The default is 43440.
•
(Optional) interface interface-id—Specify the port from
which the EnergyWise messages are sent.
which the EnergyWise messages are sent.
•
(Optional) ip ip-address—Specify the IP address from which
the EnergyWise messages are sent.
the EnergyWise messages are sent.
For the domain-name and password
•
You can enter alphanumeric characters and symbols such as
#, (, %, !, or &.
#, (, %, !, or &.
•
Do not use an asterisk (*) or a blank space between the
characters and symbols.
characters and symbols.
By default, no domain and password are assigned.
Step 4
end
Return to privileged EXEC mode.
Step 5
show energywise
show energywise domain
Verify your entries.
Step 6
copy running-config startup-config
(Optional) Save your entries in the configuration file.