Cisco Systems 3560 사용자 설명서
4-8
Catalyst 3560 Switch Software Configuration Guide
OL-8553-06
Chapter 4 Configuring Cisco EnergyWise
Managing Single Entities
Powering the PoE Port
Beginning in privileged EXEC mode:
Configuring PoE-Port Attributes
Beginning in privileged EXEC mode:
Step 10
show energywise
show energywise domain
Verify your entries.
Step 11
copy running-config startup-config
(Optional) Save your entries in the configuration file.
Command
Purpose
Command
Purpose
Step 1
configure terminal
Enter global configuration mode.
Step 2
interface interface-id
Specify the port or the range of ports to be configured, and enter
interface configuration mode.
interface configuration mode.
Step 3
energywise level 0
or
energywise level 10
(Optional) Manually power off the port, or
Manually power on the port.
Step 4
end
Return to privileged EXEC mode.
Step 5
show energywise domain
show energywise children
Verify your entries.
Step 6
copy running-config startup-config
(Optional) Save your entries in the configuration file.
Note
The power level that you set in Step 3 is the default power
level when the switch restarts.
level when the switch restarts.
Command
Purpose
Step 1
configure terminal
Enter global configuration mode.
Step 2
interface interface-id
Specify the port or the range of ports to be configured, and enter
interface configuration mode.
interface configuration mode.
Step 3
energywise importance importance
(Optional) Set the importance of the port.
The range is from 1 to 100.
The default is 1.