Cisco Systems 3560 사용자 설명서

11-24

Catalyst 3560 Switch Software Configuration Guide

OL-8553-06

Chapter 11 Configuring Interface Characteristics

Configuring Ethernet Interfaces

Beginning in privileged EXEC mode, follow these steps to configure the amount of power budgeted to a
powered device connected to each PoE port on a switch:

To return to the default setting, use the no power inline consumption default global configuration
command.

Beginning in privileged EXEC mode, follow these steps to configure amount of power budgeted to a
powered device connected to a specific PoE port:

To return to the default setting, use the no power inline consumption interface configuration command.

For information about the output of the show power inline consumption privileged EXEC command,
see the command reference for this release.

Adding a Description for an Interface

You can add a description about an interface to help you remember its function. The description appears
in the output of these privileged EXEC commands: show configuration

show running-config

and

show interfaces.

Command

Purpose

Step 1

configure terminal

Enter global configuration mode.

Step 2

no cdp run

(Optional) Disable CDP.

Step 3

power inline consumption default
wattage

Configure the power consumption of powered devices connected to each
the PoE port on the switch. The range for each device is 4000 to
15400 milliwatts. The default is 15400 milliwatts.

Step 4

end

Return to privileged EXEC mode.

Step 5

show power inline consumption

Display the power consumption status.

Step 6

copy running-config startup-config

(Optional) Save your entries in the configuration file.