Netgear GSM7228PS-100NAS 사용자 설명서

Time Range Commands for Time-Based ACLs

Time-based ACLs allow one or more rules within an ACL to be based on time. Each ACL rule 
within an ACL, except for the implicit 

deny all

 rule, can be configured to be active and 

operational only during a specific time period. The time range commands allow you to define 
specific times of the day and week to implement time-based ACLs. The time range is 
identified by a name and can then be referenced by an ACL rule defined with in an ACL.

Use this command to create a time range identified by 

, consisting of one absolute time 

entry and/or one or more periodic time entries. The 

 parameter is a case-sensitive, 

alphanumeric string from 1 to 31 characters that uniquely identifies the time range. An 
alpha-numeric string is defined as consisting of only alphabetic, numeric, dash, underscore, 
or space characters. If a time range by this name already exists, this command enters 
Time-Range config mode to allow updating the time range entries

When you successfully execute this command, the CLI mode 

changes to Time-Range Config mode.

time-range <name>

Use this command to delete a time-range identified by 

.

no time-range <name>

Use this command to add an absolute time entry to a time range. Only one absolute time 
entry is allowed per time-range. The 

 parameter is based on the currently configured 

time zone. The 

[start time date]

 parameters indicate the time and date at which the 

configuration that referenced the time range starts going into effect. The time is expressed in 
a 24-hour clock, in the form of hours:minutes. For example, 8:00 is 8:00 am and 20:00 is 8:00 
pm. The date is expressed in the format day month year. If no start time and date are 
specified, the configuration statement is in effect immediately. The 

[end time date]

 

parameters indicate the time and date at which the configuration that referenced the time 

Global Config

Global Config