Netgear GSM7228PS-100NAS 사용자 설명서

Use this command to configure the start/end time for the time-range.

periodic {start|end} time

Use this command to display a time range and all the absolute/periodic time entries that are 
defined for the time range. Use the 

parameter to identify a specific time range to 

display. When 

is not specified, all the time ranges defined in the system are displayed.

show time-range

AutoVOIP

AutoVoIP detects the VoIP streams and put the VoIP streams in the specific VLAN (auto-voip 
VLAN) and provides higher class of service to the VoIP streams automatically (both data and 
signaling). It detects the VoIP streams in two modes.

In a VoIP system, various signaling protocols are used to establish the connection between 
two VoIP devices. The supported signaling protocols are SIP, H.323, and SCCP.

The OUI-based Auto VoIP feature prioritizes VoIP packets based on the OUI bytes in the 
source MAC address. A default list of OUIs is maintained. User is also allowed to configure 
OUIs that need prioritization apart from the default OUI list. Up to 128 OUIs are allowed on 
the device or system, including the default OUIs.

Time-Range Config

Privileged EXEC

Number of time ranges configured in the system. 

Name of the time range. 

Status of the time range (active/inactive). 

Start time and day for absolute time entry. 

End time and day for absolute time entry. 

Number of periodic entries in a time-range. 

Start time and day for periodic entry. 

End time and day for periodic entry.