Netgear GSM7228PS-100NAS 사용자 설명서

Use the optional keywords to list the scaling parameters of a specific template.

show sdm prefer [dual-ipv4-and-ipv6 default |  

ipv4-routing {default | data-center} ]

Example: 

#show sdm prefer 

Current template: Dual IPv4 and IPv6

ARP Entries.................................... 4096 

IPv4 Unicast Routes............................ 6112 

IPv6 NDP Entries............................... 2048 

IPv6 Unicast Routes............................ 3072 

ECMP Next Hops................................. 4 I

Pv4 Multicast Routes........................... 256 

IPv6 Multicast Routes.......................... 256

IPv6 Management Commands

IPv6 Management commands allow a device to be managed via an IPv6 address in a switch 
or IPv4 routing (that is, independent from the IPv6 Routing package). For Routing/IPv6 builds 
of Switch CLI dual IPv4/IPv6 operation over the service port is enabled. Switch CLI has 
capabilities such as:

Static assignment of IPv6 addresses and gateways for the network ports.

The ability to ping an IPv6 link-local address over the network port. 

Using IPv6 Management commands, you can send SNMP traps and queries via the 

network port. 

The user can manage a device via the network port (in addition to a routing interface).

Privileged EXEC

The maximum number of entries in the IPv4 Address Resolution Protocol (ARP) cache 
for routing interfaces. 

The maximum number of IPv4 unicast forwarding table entries. 

The maximum number of IPv6 Neighbor Discovery Protocol (NDP) cache entries. 

The maximum number of IPv6 unicast forwarding table entries. 

The maximum number of next hops that can be installed in the IPv4 and IPv6 unicast 
forwarding tables. 

The maximum number of IPv4 multicast forwarding table entries.

The maximum number of IPv6 multicast forwarding table entries.