Netgear GS724TS-100NAS 사용자 설명서

the value given for that bit. The valid format is xx:xx:xx:xx:xx:xx. A MAC mask of 
00:00:00:00:00:00 matches a single MAC address.

VLAN. Requires a packet’s VLAN ID to match the ID listed here. Enter the VLAN ID to 

apply this criteria. The valid range is 1–4093.

Secondary VLAN. Requires a match on the value of the layer 2 secondary VLAN 

Identifier field (the inner 802.1Q tag of a double-VLAN tagged packet). Enter the 
secondary VLAN ID to apply this criteria. 

Click Cancel to cancel the configuration on the screen and reset the data on the screen to 

the latest value of the switch.

To delete a rule, select the check box associated with the rule and click Delete. 

To change a rule, select the check box associated with the rule, change the desired fields 

and click Apply. 

MAC Binding Configuration

When an ACL is bound to an interface, all the rules that have been defined are applied to the 
selected interface. Use the MAC Binding Configuration page to assign MAC ACL lists to ACL 
Priorities and Interfaces. 

To display the MAC Binding Configuration page, click Security 

 ACL, then click the Basic  

MAC Binding Configuration link.

 

To configure MAC ACL interface bindings: 

Select an existing MAC ACL from the ACL ID menu.

The packet filtering direction for ACL is Inbound, which means the MAC ACL rules are 
applied to traffic entering the port.

Specify an optional sequence number to indicate the order of this access list relative to other 

access lists already assigned to this interface and direction.