Netgear GS724TS-100NAS 사용자 설명서

The following table describes the information displayed in the MAC Binding Table.

To delete a MAC ACL-to-interface binding, select the check box next to the interface and click 
Delete. 

IP ACL

IP ACLs allow network managers to define classification actions and rules for specific ingress 
ports. Packets can be filtered on ingress (inbound) ports only. If the filter rules match, then 
some actions can be taken, including dropping the packet or disabling the port. For example, 
a network administrator defines an ACL rule that says port number 20 can receive TCP 
packets. However, if a UDP packet is received the packet is dropped.

ACLs are composed of access control entries (ACE), or rules, that consist of the filters that 
determine traffic classifications. 

Use the IP ACL Configuration page to add or remove IP-based ACLs. 

To display the IP ACL page, click Security 

 ACL, then click the Advanced  IP ACL link.

 

Interface

Displays the interface to which the MAC ACL is bound. 

Direction

Specifies the packet filtering direction for ACL. The only valid direction 
is Inbound, which means the MAC ACL rules are applied to traffic 
entering the port.

ACL Type

Displays the type of ACL assigned to selected interface and direction.

ACL ID

Displays the ACL Name identifying the ACL assigned to selected 
interface and direction.

Sequence No

Displays the Sequence Number signifying the order of specified ACL 
relative to other ACLs assigned to selected interface and direction.