Netgear GS724TS-100NAS 사용자 설명서
56
|
Chapter 2: Configuring System Information
GS716Tv2 and GS724Tv3 Software Administration Manual
Click Refresh to refresh the page with the most current data from the switch.
LLDP-MED Port Settings
Use this page to enable LLDP-MED mode on an interface and configure its properties.
To display this page, click System
LLDP Advanced LLDP-MED Port Settings.
To configure LLDP-MED settings for a port:
1.
From the Port field, select the port to configure.
2.
From the LLDP-MED Status field, enable or disable the LLDP-MED mode for the selected
interface.
Field
Description
Network Policy Number
Specifies the policy number.
Application
Specifies the media application type associated with the policy. Only the
Voice application type is supported. The application type that is received on
the interface has the VLAN ID, priority, DSCP, tagged bit status and
unknown bit status. This information is displayed only if a network policy TLV
has been transmitted.
Voice application type is supported. The application type that is received on
the interface has the VLAN ID, priority, DSCP, tagged bit status and
unknown bit status. This information is displayed only if a network policy TLV
has been transmitted.
VLAN ID
Specifies the VLAN ID associated with the policy.
VLAN Type
Specifies whether the VLAN associated with the policy is tagged or
untagged.
untagged.
User Priority
Specifies the priority associated with the policy.
DSCP
Specifies the DSCP associated with a particular policy type.