Netgear GS724TS-100NAS 사용자 설명서
Chapter 2: Configuring System Information
|
57
GS716Tv2 and GS724Tv3 Software Administration Manual
3.
From the Notification field, specify whether the port should send a topology change
notification if a device is connected or removed.
4.
From the Transmit Optional TLVs field, specify whether the port should transmit optional
type length values (TLVs) in the LLDP PDU frames. If enabled, the following LLDP-MED
TLVs are transmitted:
•
MED Capabilities
•
Network Policy
•
Location Identification
•
Extended Power via MDI: PSE
•
Extended Power via MDI: PD
•
Inventory
5.
Click Apply to send the updated configuration to the switch. These changes occur
immediately and the configuration will be saved.
6.
Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
Local Information
Use the LLDP Local Information page to view the data that each port advertises through
LLDP.
LLDP.
To display the LLDP Local Device Information page, click System > Advanced > LLDP >
Local Information.
Local Information.