Netgear GS752TXS 사용자 설명서

Align the mounting holes in the brackets with the holes in the rack, and insert two pan-head 
screws with nylon washers through each bracket and into the rack. 

Tighten the screws with a #2 Phillips screwdriver to secure mounting brackets to the rack. 

Step 3: Checking the Installation

Before applying power to the switch, perform the following steps:

Inspect the equipment thoroughly.

Verify that all cables are installed correctly.

Check cable routing to make sure cables are not damaged or creating a safety hazard.

Ensure all equipment is mounted properly and securely.

Step 4: Connecting Devices to the Switch

The following procedure describes how to connect PCs to the switch’s RJ-45 ports. The 
GS752TXS Smart Switch contains Auto Uplink technology, which allows the attaching of 
devices using either straight-through or crossover cables.