Netgear GS752TXS 사용자 설명서
26
|
Chapter 4. Installation
GS752TXS Smart Switch Hardware Installation Guide
Step 8: Managing the Switch using a Web Browser or the
PC Utility
PC Utility
The GS752TXS Smart Switch contains software for viewing, changing, and monitoring the
way it works. This management software is not required for the switch to work. The ports can
be used without using the management software. However, the management software
enables the setup of VLAN and trunking features and also improves the efficiency of the
switch, which results in the improvement of its overall performance as well as the
performance of the network.
way it works. This management software is not required for the switch to work. The ports can
be used without using the management software. However, the management software
enables the setup of VLAN and trunking features and also improves the efficiency of the
switch, which results in the improvement of its overall performance as well as the
performance of the network.
After powering up the switch for the first time, the Smart Switch can be configured using a
Web browser or a program called Smart Control Center. For more information about
managing the switch, see the
Web browser or a program called Smart Control Center. For more information about
managing the switch, see the
Software Administration Manual on the Smart Switch Resource
CD.
Note:
The switch is configured with a default IP address of 192.168.0.239
and a subnet mask of 255.255.255.0.