StarTech.com SV431DVIUAHR 사용자 설명서
Instruction Manual
5
Auto Scan
Auto Scan automatically scans through the connected computers one by
one in a fixed interval (see Scan Time below).
Please Note: The keyboard and mouse are inoperable during Auto Scan.
one in a fixed interval (see Scan Time below).
Please Note: The keyboard and mouse are inoperable during Auto Scan.
Scan Time
Scan time sets the interval at which connected computers will be
scanned. The Scan Time options are 3, 8, 15 and 30 seconds.
Please Note: Scan Time is automatically set to 3 seconds (default) when
the SV431DVIUAHR loses power.
To activate Auto Scan, hold down front panel push buttons “3” and “4”
simultaneously. The port LED flashes during Auto Scan. Auto Scan is
effective for powered-on computers only. To exit Auto Scan mode, simply
tap any one of the pushbuttons.
To change the Scan Time interval, press hold front panel buttons “1” and
“2” simultaneously. The SV431DVIUAHR will beep 1, 2, 3 or 4 times for
Scan Time of 3, 8, 15 or 30 seconds respectively.
scanned. The Scan Time options are 3, 8, 15 and 30 seconds.
Please Note: Scan Time is automatically set to 3 seconds (default) when
the SV431DVIUAHR loses power.
To activate Auto Scan, hold down front panel push buttons “3” and “4”
simultaneously. The port LED flashes during Auto Scan. Auto Scan is
effective for powered-on computers only. To exit Auto Scan mode, simply
tap any one of the pushbuttons.
To change the Scan Time interval, press hold front panel buttons “1” and
“2” simultaneously. The SV431DVIUAHR will beep 1, 2, 3 or 4 times for
Scan Time of 3, 8, 15 or 30 seconds respectively.