StarTech.com SV431DVIUAHR 사용자 설명서

Instruction Manual

6

To ensure optimal video signal strength corresponding to the length or 
quality of the DVI cable being used, the user can press the “FUNC” button 
in combination with the other pushbuttons.
Step 1. 
Press the “FUNC” button three times. The “FUNC” LED will flash one time 
per second.
Step 2. 
Press “1” once or twice to adjust the

 equalization of the selected port 

input video strength. One beep will sound to indicate normal operation or 
two beeps to indicate enhanced mode.
or
Press pushbutton “3” once or twice to adjust the 

output current of 

selected port. One beep will sound to indicate normal operation or two 
beeps to indicate enhanced mode.
or
Press pushbutton “4” one, two, three or four times to adjust the 

emphasis of the selected port, with one beep (no pre-emphasis), two 
beeps (low pre-emphasis), three beeps (medium pre-emphasis), or four 
beeps (high pre-emphasis).
Step 3. 
Once the desired settings are complete, press the “FUNC” button once to 
exit the settings mode.