Avaya C460 사용자 설명서
Chapter 2 Avaya C460 CLI Commands
220
Avaya C460 Reference Guide
Example:
show time
User level: read-only, read-write, admin.
Use the show time command to display the current C460 time and timezone.
Use the show time command to display the current C460 time and timezone.
The syntax for this command is:
show time
Example:
show time parameters
User level: read-only, read-write, admin.
Use the show time parameters command to display the time status and
parameters.
Use the show time parameters command to display the time status and
parameters.
The syntax for this command is:
show time parameters
Example:
C460-1> show tftp upload status 1
Module : 1
Source file : C460-config
Destination file : c:\conf.cfg
Host : 149.49.36.200
Running state : Executing
Failure display : (null)
Last warning : No-warning
C460-1> show time
10:32:34 27 JAN 2000 GMT
C460-1> show time parameters
Client status: Enabled
Current time : L:00:57:19 01 JAN 1970 GMT
Timezone set to 'GMT', offset from UTC is 0 hours
Time-Server : 0.0.0.0 (I.e. broadcast address)
Time acquired from Time-Server: 0.0.0.0
Time protocol set to : TIME protcol