Avaya C460 사용자 설명서
Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide
221
show timezone
User level: read-only, read-write, admin.
Use the show timezone command to display the current C460 time zone.
Use the show timezone command to display the current C460 time zone.
The syntax for this command is:
show timezone
Example:
show trunk
User level: read-only, read-write, admin.
Use the show trunk command to display VLAN tagging information for the
switch.
Use the show trunk command to display VLAN tagging information for the
switch.
The syntax for this command is:
show trunk
[<module>[/<port>-<port]]
Example:
Output Fields:
C460-1> show timezone
Timezone set to 'GMT', offset from UTC is 0 hours
module
(Optional)
(Optional)
Number of the module. If you do not specify a number, all
modules are shown.
modules are shown.
port
(Optional)
(Optional)
Number of the port on the module. If you do not specify a
number, all the ports on the module are shown.
You can also specify a range of ports separated by a dash, for
example, 4/5-13 for ports 5 to 13 on module 4
number, all the ports on the module are shown.
You can also specify a range of ports separated by a dash, for
example, 4/5-13 for ports 5 to 13 on module 4
C460-1> show trunk 4/1
Port
Mode
Binding mode
Native vlan
-----
-----
--------------------
-----------
41/1 off statically bound 1
41/2
dot1q
statically bound
2
Field
Description
Port
Switch and port number(s)