Avaya P332MF 사용자 설명서

Chapter 6

CLI – Layer 2

Avaya P332MF User’s Guide

117

Use the 

set ppp authentication

 

incoming

 command to define the 

authentication method used for a PPP server or client session.

The syntax for this command is: 

 

{pap|chap|none}

Example: 

P330-N(super)# set ppp authentication incoming chap 

Use the

 set ppp

 

incoming timeout

 command to configure the number of 

minutes until the system automatically disconnects an idle PPP incoming session. 

The syntax for this command is:

set ppp incoming timeout <time>

Output Example:

P330-N> set ppp incoming timeout 15 

PPP incoming session will automatically disconnect after 15 

minutes of idle time

Use the set ppp baud-rate command to define the baud rate used in PPP sessions. 
Note that the peer baud rate must be set at the same value as the host.

The syntax for this command is:

set ppp baud-rate <9600 | 19200 | 38400> 

Example:

P330-N# set ppp baud-rate 38400

pap

PAP authentication method

chap

CHAP authentication method

none

No authentication

time

The timeout in minutes