Avaya P332MF 사용자 설명서

Chapter 6

CLI – Layer 2

124

Avaya P332MF User’s Guide

Use the

 reset 

command to restart the system or an individual switch. If no switch 

number is defined or the switch number of the Master is defined, the command 
resets the entire system. If the switch number is defined, the command resets the 
specified switch only.

You should perform a reset after downloading software to the switch.

The syntax for this command is:

reset {module number}

Output Example:
To reset the Master agent and force the entire system to reset:

P330-N# reset

This command will force a switch-over to the master module and 

disconnect your telnet session.

Do you want to continue (y/n) [n]? y

Connection closed by foreign host.

Output Example:
To reset switch 4:

P330-N# reset 4

This command will reset module 4 and may disconnect your 

telnet session.

Do you want to continue (y/n) [n]? y

Resetting module 4...

Use the 

reset stack

 command to perform a hardware reset in the entire stack.

The syntax for this command is: