Avaya P332MF 사용자 설명서
Chapter 6
CLI – Layer 2
126
Avaya P332MF User’s Guide
The syntax for this command is:
nvram initialize [switch|all]
Output Example:
P330-N# nvram initialize
This command will force a factory default and switch-over to
the master module and disconnect your telnet session.
Do you want to continue (y/n) [n]? y
Connection closed by foreign host.
host%
rmon history
Use the
rmon history
command to create an RMON history entry.
The syntax for this command is:
rmon history <history index> [<module>[</port>]] interval
<interval> buckets <number of buckets> owner <owner name>
Output Example:
P330-N# rmon history 1026 1026 3/2 30 buckets 20 owner amir
history 1026 was created successfully
switch
Resets all the switching level parameters (Layer 2 only) throughout
the stack
the stack
all
Resets all parameters including licenses and routing parameters of
the Layer 3 switches present in the stack
the Layer 3 switches present in the stack
history_index
This is the history index number of this entry (it is advisable to
use the same interface number as your history index number).
use the same interface number as your history index number).
module/port
The switch number/the port number.
interval
The interval between 2 samples.
number of
buckets
buckets
The number of buckets defined.
owner name
The owner name string.