Avaya M770 사용자 설명서
Chapter 14
Managing the LECS
198
Avaya M770 ATM Switch User’s Guide
Specifying default ELANs
For information on default ELANs, see Viewing default ELANs earlier in this
chapter.
To specify a default ELAN, use the
chapter.
To specify a default ELAN, use the
lane lecs default
command:
Viewing ATM Forum compliant statistics for the LECS
If the LECS is local then you can view the ATM Forum compliant statistics that have
been gathered for the LECS. These statistics are continuously being monitored and
updated.
To view the ATM Forum compliant statistics for the local LECS, use the
been gathered for the LECS. These statistics are continuously being monitored and
updated.
To view the ATM Forum compliant statistics for the local LECS, use the
lane
lecs stats
command:
Command:
M15-155s8:/>lane lecs default <type> <ELAN name>
Example:
M15-155s8:/>lane lecs default ethernet default
Parameters:
<type>
The type of ELAN that a LEC or LES asks to join or
host.
You can select one of the following types:
“ethernet” - an Ethernet ELAN type.
“unspecified” -to be used when neither an ELAN name
host.
You can select one of the following types:
“ethernet” - an Ethernet ELAN type.
“unspecified” -to be used when neither an ELAN name
nor a specific ELAN type has been
specified.
specified.
<ELAN name>
The name of the ELAN to use when a LEC does not
specify the ELAN.
If you want to remove a default ELAN name enter
specify the ELAN.
If you want to remove a default ELAN name enter
none
.
Command:
M15-155s8:/>lane lecs stats
Output:
control packets in
14039
successful config requests
12651
malformed config requests
0
invalid config request parameters
952
rejected due to insufficient resources
0
rejected due to security restrictions
0
rejected because LECID is not zero
0
rejected due to invalid LAN destination
0
rejected due to invalid ATM address
0
rejected because Client is not recognized 0
rejected due to conflicting parameters
0
rejected due to insufficient info
836