Avaya M770 사용자 설명서
Chapter 15
Managing the LES/BUS
200
Avaya M770 ATM Switch User’s Guide
To create a new LES in the switch, use the
lane les create
command. For
definitions of the various LES modes, see “changing the LES registration mode”
later in this chapter.
later in this chapter.
Note:
Each selector entered, when creating a LES, must be unique on the switch.
You can use the
lane les show
command to view a list of all selectors currently
in use. Selectors 7f, 80 and 81 are reserved for special use and cannot be used for the
LES or BUS.
LES or BUS.
Note:
The LES name should be the same as the hosted ELAN name.
Note:
Avaya strongly recommends that you use distributed LES/BUS services instead
of resilient.
Command:
M15-155s8:/>lane les create <elan-name> <mode> <type> <les-selector> <bus-selector>
Example:
M15-155s8:/>lane les create marketing_eth distributed ethernet 82 83
Parameters:
<elan-name>
Enter the name of the ELAN that the new LES will host. The ELAN
name should be unique within the ATM network. This parameter is
case-sensitive.
name should be unique within the ATM network. This parameter is
case-sensitive.
<mode>
Enter the mode type as either “distributed”, “standby”, or “manual”.
See above explanation for correct mode usage.
distributed - automatic registration for distributed LESes.
standby - automatic registration with standby support.
manual - manual registration.
See above explanation for correct mode usage.
distributed - automatic registration for distributed LESes.
standby - automatic registration with standby support.
manual - manual registration.
<type>
Enter the type of LES ELAN as “ethernet”.
<les-
selector>
Enter the 1 or 2 digit hexadecimal ATM selector for the LES.
<bus-
selector>
Enter the 1 or 2 digit hexadecimal ATM selector for the associated BUS
functions.
functions.