Avaya M770 사용자 설명서
Chapter 6
Managing Virtual Ports
58
Avaya M770 ATM Switch User’s Guide
ILMI State
The ILMI state of the virtual port. The possible ILMI states are:
Inactive
Inactive
The virtual port is disabled or the physical
layer is down.
NoContact
The physical layer is up but the remote
ILMI entity is not responding.
CStartSent
The M770 ATM Switch is attempting to start
an ILMI dialogue (a cold start trap has been
sent).
sent).
GNTimeout
The M770 ATM Switch has received no
response to a getnext request from the ILMI
prefix table of the remote device.
prefix table of the remote device.
GetRemoteInfo
The M770 ATM Switch is interrogating the
remote device to determine link
characteristics.
remote device to determine link
characteristics.
SwDoRegPrefix
The M770 ATM Switch telling the remote
device about the switch prefix of the M770
ATM Switch.
device about the switch prefix of the M770
ATM Switch.
SwWaitAddress
The M770 ATM Switch has set the prefix
and is waiting to receive the address from
the remote device.
the remote device.
SwHaveAddress The M770 ATM Switch has received the
address from the user side.
SwToSwPause
There is a pause in the ILMI dialogue
between two switches.
Ready
ILMI is up on an UNI link (not between two
switches).
InterSwitch
ILMI is up on a link between two switches.
NoPrefixes
ILMI has tried repeatedly to tell the remote
device its prefix without success. It will try
to bring signalling up but remains in this
state.
to bring signalling up but remains in this
state.
Disabled
ILMI is disabled on this port.
ShuttingDown(Disabled)
Port is in the process of disabling ILMI on
this port.
Table 6.1
Output from the vport show command (Continued)
Field
Description