Avaya M770 사용자 설명서
Chapter 6
Managing Virtual Ports
Avaya M770 ATM Switch User’s Guide
59
Listing the link configuration information for all virtual ports
You can view the link configuration information for all virtual ports on a module or
for a specific virtual port.
Any virtual port information that is marked with an asterisk (*) has been learned by
the M770 ATM Switch during the ILMI dialogue with the remote device.
Information that is not marked with an asterisk has either been configured by the
user or is the default setting for the virtual port.
To view the link configuration information about all virtual ports, use the
for a specific virtual port.
Any virtual port information that is marked with an asterisk (*) has been learned by
the M770 ATM Switch during the ILMI dialogue with the remote device.
Information that is not marked with an asterisk has either been configured by the
user or is the default setting for the virtual port.
To view the link configuration information about all virtual ports, use the
vport show config
command.
The
vport
show config
command displays the information described in Table
Command:
M15-155s8:/>vport show config [<vport id>]
Parameter:
<vport
id>
The virtual port.
This is displayed in the format <slot>.<port>.<virtual port number>
If a <virtual port number> parameter is not supplied then the link
configuration summary information is displayed for all virtual ports.
This is displayed in the format <slot>.<port>.<virtual port number>
If a <virtual port number> parameter is not supplied then the link
configuration summary information is displayed for all virtual ports.
Example:
M15-155s8:/>vport show config
Output:
Virtual Port Configuration Information
Virtual Admin
Virtual Admin
OperILMIPollMultiStrictSig. SSCOPWait for
Port Id State
StateEnabledModeRegAALRx. WindowPeer SSCOP
8.0.0
Up
UpNo
DisabledOnOffDefaultNo
8.1.0
Down
DownYesNoneOn
OffDefault
No
8.2.0
Up
UpYes
Port + ESIOnOffDefaultNo
8.3.0
Up
DownYesNoneOn
OffDefault
No
8.4.0
Down
DownYesNoneOn
OffDefault No
Table 6.2
Output from the vport show config command
Field
Description
Virtual Port Id
The virtual port. This is displayed in the format
<slot>.<port>.<virtual port number>.
<slot>.<port>.<virtual port number>.
Admin State
The administrative state of the virtual port. If the state is UP
then this virtual port is enabled. If the state is DOWN then this
virtual port is disabled.
This will occur when you disable the virtual port using the
command-line interface or via Management.
then this virtual port is enabled. If the state is DOWN then this
virtual port is disabled.
This will occur when you disable the virtual port using the
command-line interface or via Management.
Oper State
The operational state of the virtual port. If the state is UP then
this virtual port is functional. If the state is DOWN then this
virtual port is not functional. This could be due to a problem
with ILMI or ILMI has been disabled due to a problem with the
physical connection.
this virtual port is functional. If the state is DOWN then this
virtual port is not functional. This could be due to a problem
with ILMI or ILMI has been disabled due to a problem with the
physical connection.
ILMI Enabled
Whether or not ILMI is enabled on the virtual port.