Avaya P130 사용자 설명서

Chapter 6        Avaya P130 CLI

72

 Avaya P130 User’s Guide

Example:

To disable link negotiation protocol on port 4, module 1:
P130-1# set port negotiation 1/4 disable
Link negotiation protocol disabled on port 1/4. 

Use the 

set port enable command to enable a port or a range of ports.

The syntax for this command is:
set port enable <mod_num/port_num>

Example:

To enable port 3:
P130-1# set port enable 1/3
Port 1/3 enabled.

Use the 

set port disable command to disable a port or a range of ports.

If you have disabled a particular port but the link is still connected, the LED 

for that port will remain ON.

The syntax for this command is:
set port disable <mod_num/port_num>

Example:
P130-1# set port disable 1/10
Port 1/10 disabled.

mod_num

Module number 

port_num

Number of the port on the module 

mod_num

Module number 

port_num

Number of the port on the module