Avaya P880 사용자 설명서

                   23

610-0184-095

June 14, 2001

Flush the L3 Forwarding Table before changing the L3 Forwarding 
Cache Max Entries value.

The following problems have no workarounds: 

■

The switch does not add relay agent information (option 82) 
to a BOOTP request. 

■

The option 82 relay agent does not check frames for the 
IPSEC authentication header or IPSEC encapsulating security 
payload. 

The following problem has no workaround:

■

Text files copied from the PCMCIA card cannot be read.

The 80-Series Supervisor module will not fully reset if you initiate a 
reset from either the CLI or the web agent after you perform a 
command that involves reading from, or writing to, the PCMCIA 
card.

Power the switch off and then on after you read from or write to the 
PCMCIA card.

The following problems have no workaround: 

■

A Telnet session to the serial port via PPP may time out 
during attempts to transfer large files, such as executable 
images, to a Trivial File Transfer Protocol (TFTP) server. This 
does not terminate the file transfer. An in-progress TFTP file 
transfer ends only after the file transfer is completed.

■

A new baud rate may take effect before the current PPP 
connection is terminated if the baud rate change command is 
entered more than once. This results in the termination of 
the PPP connection. This requires re-establishment of a PPP 
connection.