ZyXEL Communications XGS-4526 사용자 설명서

Chapter 8 Basic Setting

XGS-4526/4528F/4728F User’s Guide

Note: The uplink port connected to the Internet should be the root port. Otherwise, 

with smart isolation enabled, the isolated ports cannot access the Internet.

Click Basic Setting and then Switch Setup in the navigation panel to display the 
screen as shown. The VLAN setup screens change depending on whether you 
choose 802.1Q or Port Based in the VLAN Type field in this screen. Refer to the 
chapter on VLAN.

Figure 34   Basic Setting > Switch Setup 

The following table describes the labels in this screen. 

Table 12   Basic Setting > Switch Setup 

VLAN Type 

Choose 802.1Q or Port Based. The VLAN Setup screen changes 
depending on whether you choose 802.1Q VLAN type or Port Based 
VLAN type in this screen. See 

 for more 

information. 

Bridge Control 
Protocol 
Transparency 

Select Active to allow the Switch to handle bridging control protocols 
(STP, for example). You also need to define how to treat a BPDU in the 
Port Setup screen.